Описание

ABSF 200Pcs Solder Seal Wire Connectors, Solder Seal Heat Shrink Butt Connectors Terminals Electrical Waterproof Insulated Marin
1.Sleeve one of the joints from the big end of the heat-shrinkable tube to the small end.
2.Manual connection of two wires to ensure tighter connection.
3.Move the joint to the middle of the solder pipe and place it over about 0.6feet above the flame of a fire gun or candle for heating.
4.The flame moves and heats from the solder, When the solder is fully welded,then moves it to both sides for shrink the heat shrinkable tube and melt and fill the hot melt adhesive.
5.When heating, don't just focus on the solder in the middle.It's easy to burn out the peripheral heat-shrinkable pipes by excessive local heating.
Operating temperature: -55°C ~ 125°C
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
White:diameter 1.5mm, for cable cross section 0.25 - 0.35mm² (AWG 26-24)
Red: diameter 3mm, for cable cross section0.5-1.0 mm² (AWG 22-18)
Blue: diameter 5mm, for cable cross section1.0-2.5 mm² (AWG 16-14)
Yellow:diameter 6mm, for cable cross-section 4.0-6.0 mm² (AWG 12-10)
Color: red + blue + white + yellow
material: plastic
Package Include:50* White
80* Red
60* Blue
10* Yellow
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2.Manual connection of two wires to ensure tighter connection.
3.Move the joint to the middle of the solder pipe and place it over about 0.6feet above the flame of a fire gun or candle for heating.
4.The flame moves and heats from the solder, When the solder is fully welded,then moves it to both sides for shrink the heat shrinkable tube and melt and fill the hot melt adhesive.
5.When heating, don't just focus on the solder in the middle.It's easy to burn out the peripheral heat-shrinkable pipes by excessive local heating.
Operating temperature: -55°C ~ 125°C
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
White:diameter 1.5mm, for cable cross section 0.25 - 0.35mm² (AWG 26-24)
Red: diameter 3mm, for cable cross section0.5-1.0 mm² (AWG 22-18)
Blue: diameter 5mm, for cable cross section1.0-2.5 mm² (AWG 16-14)
Yellow:diameter 6mm, for cable cross-section 4.0-6.0 mm² (AWG 12-10)
Color: red + blue + white + yellow
material: plastic
Package Include:50* White
80* Red
60* Blue
10* Yellow
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеТовар мы можем отгрузить в течение 5-8 рабочих дней, обычно мыВ зависимости от времени заказа клиента для упаковки и отгрузки, мы должныВнимательно проверьте качество товара перед отправкой, поэтому ВозьмитеВремени, чтобы справиться с этим. Время доставки: Из-заК факторам форс-мажорных обстоятельств: ураганы, дождевые штормы влияют на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени на обработку, мыПодождите, пока посылка дойдет до вашей стороны. Если ваша информация о логистике поступает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не свяжется с вами, пожалуйста, свяжитесь с вашимМестное почтовое отделение как можно скорее, чтобы получить посылка. В противном случаеСверхурочное получение посылок, местное почтовое отделение вернет вамПосылка, ответственность за себя. Время защиты заканчивается: В тех случаях, когдаМы закончили время отгрузки, если срок защиты продуктаНа исходе, пожалуйста, увеличьте срок защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Ответственность за эти расходы несет покупатель. Ввозные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы оплачиваются покупателем




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены полученным товаром (неправильный, поврежденный,Дефект, или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоЛичные причины (выбрать не нравится или мне не нужен этот продуктБольше), возврат расходы по доставке будет нести ответственность покупателя. МыНе принимаются какие-либо предметы с запахами (духи. Дым, и т. Д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьНам с номером отслеживания доставки, конкретной причиной возврата,И ваш заказ ID.Характеристики
- Применение
- other
- Номер модели
- heat-shrinkable tube
















