Описание
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
Notice:
We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.
Leadshine 3ND583 - 3 Phase Analog Stepper Drive Max 50 VDC / 8.3A
(3 pcs per lot)
The 3ND583 is a high resolution 3-phase microstepping driver based on precision current control technology. It’s suitable for driving 3-phase hybrid stepping motors from NEMA size 17 to 34. By using the advanced pure-sinusoidal current control technology, both the noise and vibration of the stepping motor have been greatly reduced, which makes the stepping motors offer servo-like performances. Compared to the 3MD560, it’s lighter and smaller, and compared to most of the microstepping drivers in the market, both driver heating and motor heating have been reduced by 15-30%.
Features:
High performance, low noise and lost cost
Low driver heating and low motor heating
Supply voltage up to 50 VDC
Output current up to 8.3A (RMS 5.9A)
Input signal TTL compatible
Automatic idle-current reduction
Suitable for 3-phase stepping motors, including 3 lead and 6 lead motors
Optically isolated differential input signals, pulse frequency up to 300 KHz
8 selectable resolutions up to 10000 steps/rev
DIP switch current setting with 16 different values
PUL/DIR & CW/CCW modes optional
Over-voltage, short-voltage, over-current and short-circuit protection
Small size for easy mounting
Electrical Specifications

Connector

Microstep Resolution Selection And Current Setting


Typical Connection

Mechanical Specification

Companion products
35HS01 (stepper motor)
39HS02 (Stepper Motor)
42HS02 (Stepper Motor)
42HS03 (Stepper Motor)
Real Photo:




![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() |
Характеристики
- Тип двигателя
- Шаговый электродвигатель
- Номер модели
- 3ND583
- Питание
- DC
- Control Mode
- Step & Direction
- Max Input Frequency
- 200Khz
- Input Voltage Range
- 50 VDC max
- Output Current
- 8.3A max
- Logic Current Range
- 7-16mA (10mA typical)
- Logic Voltage Range
- 4-5 VDC for pulse active high (default)
- Communication Type
- RS232
- Step Width
- 2,500 ns
- Isolation Resistance
- 500M Ohm
- Protection
- Over-current, over-voltage, and stall