Leadshine ACS306 DC Вход безщеточный сервопривод с 20-30 В постоянного тока Вход Напряжение и 15A ток (от 7004 руб.)

Описание

Notice:

We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.

ACS306 DC Input Brushlss Servo Drive

Leadshine's fully digital AC servo drive ACS306 is developed with 32-bit DSP based on advanced control algorithm. Since its input commands are PUL/DIR signals, the users can upgrade stepping drives to the ACS306 without changing control systems. The ACS306 can offer high precision, high speed and high reliability performance, and widely used in inkjet printers, engraving machines, and etc. A built-in controller can be used for testing and tuning. PC based and handheld configuration & tuning tools can meet different tuning environments or requirements. The ACS306 can drive both DC brushless and AC servo motors. But it is more suitable for the DC brushless servo motors. Compare to ACS606, the ACS306 has smaller size and additional alarm (fault) signal output to indicate error.

Features:

Advance DSP current control technology

Step & Dir, or CW/CCW control

High precision; smooth & quiet motor movement

Input voltage: 20-30 VDC

Continuous current: 6 A

Peak current: 15A

Capable of driving 10 - 180 W brushless servo motors

Electronic gear rate from 1/255 to 255

Built-in motion profile for servo tuning and testing

Small size, surface-mount technology

Specifications:

Model:ACS306

Control Mode:Step & Dir

Max Input Frequency:200KHz

Input Voltage Range:20 - 30 VDC

Continuous Current:6 A

Peak Current:15 A

Logic Current Range:7-16 mA (10mA typical)

Logic Voltage Range:4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low

Communication Type:RS232

Pulse enabled at:Rising edge

Electronic gear ratio:1/255 - 255

# of Digital Inputs:3

# of Digital Onputs:1

Step Width:2,500 ns

Minimal Direction Setup Time:5,000 ns

Protection:Over-current; over-voltage; encoder or hall error; position following error

Isolation Resistance:500M Ohm

Environment:Avoid dust, oil fog and corrosive gases

Ambient Temporature:0-50°C

Humidity:40–95% RH

Operating Temporature:0-70°C

Vibration:5.9 m/s2 Max

Storage Temporature:-20-65°C

Specification:4.57 X 2.73 X 1.04 Inches

Weight:0.40 lb

Electrical Specifications (Tj = 25oC/77oF):

Parameters	ACS306
Parameters	Min.	Typical	Max.	Unit
Peak output current	-	15	A
Continue output current	-	6	A
Supply voltage	+20	-	+30	VDC
Logic signal current	7	10	16	mA
Pulse input frequency	-	200	kHz
Isolation resistance	500	Mohm
Current provided to encoder	-	-	100	mA